This is an 0-4-2 freelance narrow gauge tank locomotive built by the Exmoor Steam Railway for the South Downs Light Railway Society in 2004. It was designed to cope with the tight radiuses and narrow clearances on the Railway whilst still being capable of handling heavy trains.
The engine is owned jointly by the Society and a group of members.
The colour scheme and name are those of the London Brighton and South Coast Railway which built the line to Pulborough and whose D3 class locomotive carried the same name.
The locomotive was built to 10.5" gauge in Australia in 1934. It was imported into the UK in the 1950's by Mr. Bob Hamblin and had spent 20 years, until fairly recently, in a garage in Uppingham. The loco was restored and re-gauged to 10.25" at the British Engineerium, where Chief Engineer Peter Fagg supervised the contracts and carried out most of the engineering work. The repainting and line was completed by Alan Roberts and Julian McQuillan. It is currently owned by father and son, Paul and Thomas Cowlin.
More information has been gathered, mainly from the August 1953 edition of the Model Engineer: A 5" and 10.5" loco was commissioned by Dr. H. S. Bush for his garden in Caulfield, Victoria, Austrilia. The bulder was J.J. Mahony of West Melbourne. The owner's notes from the time state "both engines are superbly built, and though not adhering strictly to scale, each is a thing of artistic beauty as well as of mechanical skill and symmetry. They have both been, and still are, universally admired and are, of course, capable of hauling passengers."
The manufacturer's notes are interesting, and important extract is as follows: "The larger engines is a 2" scale, 10.5" gauge 'Pacific', following closely the LNER type. As no drawings were available, I had to start from scratch and make my own from some photos in the 'Wonder Book of Railways'. Then I had to have all the necessary patterns (wheels, cylinders etc.) made, as no parts are procurable out here."
Alice is about a half scale model of a Bagnal 0-4-2 ST locomotive that was widely used on narrow gauge industrial and mining railways both throughout the UK and around the world.
It was built by SDLRS member Giles Favell to drawings made by his father. Construction took several years being a very occasional task until the formation of South Downs Light Railway prompted the final stage. It was completed in 2001 and named after Giles' mother. It is still owned by Giles who kindly allows it to be used on the railway.
Construction of 27 started before the war by G&S Light Engineering but was not completed until 1947 by Ernest Dove who purchased the frames from G&S. Dove sold the engine new in 1947 to William Botterill of Botterill Miniature Railways. It ran for a time on Margate pier, moving in about 1950 to the Cleethorpes Miniature Railway which was 101/4" gauge at that time.
During this early part of her life she was known as "The Queen of Scots" and in about 1951, if not in 1950, was noted carrying a red livery. At the end of the 1953 season "Queen of Scots" was placed in store following the sale of the Cleethorpes line and its motive power being replaced by battery electrics. The engine was sold to Geoff Hunt of Bristol, a dealer in miniature railway equipment in 1956, later in 1956 "Queen of Scots" was sold to Sam Sunter of Calgary, Alberta. Sam hailed originally from Northumberland and had moved to Calgary, I think, in the 1920's, he established a 10 1/4" gauge railway in Bowness Park using a Carland Royal Scot and had purchased Queen of Scots to add to his motive power.
Sam started on a long term rebuild of what became No 27 Isabel (Sam's wife's middle name). During this time Sam moved to Victoria on Vancouver Island and established the Victoria Miniature Railway in Cordova Bay. This opened in 1961 using a Canadian built 4-6-4 Isabel coming into service in about 1962. John Lunn (our Permanent Way Manager) was introduced to Sam and the V.M.R in May 1966, one month after arriving in Canada with his brothers and parents. John drove Isabel from May 1966 until just after he started work on Canadian Pacific in 1969. John drove the engine again during the summer holiday of 1969 as Canadian Pacific had laid him off until that September.
The V.M.R closed in 1970-71 and following sale to several different purchasers the engine finished up in Canfield Ohio U.S.A. being stored until purchased by Brian Gent and Peter Bowers and returning to the U.K. on 15th December 2002, where John purchased the loco on 4th May 2012 and it was moved to his home for a long slow overhaul to take place. A new boiler has been made along with new running boards and tender body, of the front bogie only the wheels and axles are original likewise all driving axles and driving axleboxes have been replaced, on replacing the connecting rods John found that the left leading rod was 3/32" shorter than the corresponding right hand rod, the addition of slop in all the driving boxes plus an off set big end bearing appears to have overcome this problem!!
As John wrote this article on 11th October 2018, the engine is four days away from moving to the South Downs Light Railway, its new home where it will receive its new boiler etc. The tender is at present up on stands ready for Mick Blackburn to do the lining out.
There are still a lot of jobs to do including the last big job which is to remove the cylinder and valve covers to the best of my knowledge these have not been off since Sam did his own overhaul in the 50's.
Arun is a diesel hydraulic locomotive with an 0-4-2 wheel arrangement. The diesel engine is a 24 horse-power unit made by Kabota. This drives a hydraulic generator which in turn drives a hydraulic motor for traction.
It is a freelance design built to suit South Downs Light Railway's requirements by Exmoor Steam Railways in 2016. It is fitted with air brake controls and a track sander to help the locomotive to climb the steep gradient in damp weather.
Peggy was built by the Exmoor Steam Railway of Bratton Fleming, Barnstaple, North Devon in 2007 and came to the South Downs Light Railway in December of that year. Her works number is 334.
She is a sister engine to 319 Pulborough although there are detail differences between them.
She is a freelance 0-4-2 narrow gauge tank engine built in the Exmoor Steam Railway style. Her cylinders are 3.5" x 5" and the driving wheels are 9.25" in diameter. The working boiler pressure is 120lbs psi. She is approximately one-fifth full size.
In running order Peggy weighs 1275kgs and is more than capable of hauling our heaviest trains.
Peggy carries the Royal Blue livery of old Great Eastern Railway. She is owned by a group of members called the Peggy Owners Group (POGS for short). She is named after the mother-in-law of the principal member of the group who recalls seeing the station pilot at Liverpool Street Station fully lined in GER livery.
The two-cylinder Class 5-F/4-P 2-6-0 was the first locomotive design credited to Sir William Stanier after he became Chief Mechanical Engineer of the LMS in 1932.
Only 40 were built and were seen all round the Midland Region. They rarely made headlines, being used on duties such as fast freight, parcels, medium goods and local passenger work. Their main 'excitement' came with summer specials and holiday expresses.
The model was completed in 1987 by the late Peter Howard for his Downsells Railway near Maidstone in Kent. Prior to the builder's premature death in 1998, the loco was acquired by Peter Taylor initially to run on the Manor Railway, Ingfield and subsequently on the South Downs Light Railway, Pulborough.
Boiler – built by Bennett Boilers, Bristol in 1987. Working pressure 100 lb/sq. in.
Cylinders – 3 in. bore x 4¾ in. stroke. Fitted with steam operated drain cocks.
This locomotive was built for Lord Braybrooke of Audley End in 1997 by David Curwen (Chief Mechanical Engineer of the Talyllyn Railway for its first season of operation in preservation during 1951). It operated upon the Audley End Railway as Barbara Curwen – David Curwen's wife, until 2014 when it was withdrawn for a lengthy overhaul, including a new firebox.
After the passing of Lord Braybrooke in 2017, a decision was taken to dispose of a number of the Railway's smaller locomotives, including Barbara Curwen as their volume of traffic demanded longer trains than those locomotives were generally able to handle. As a result an auction was held on 12th March 2019 and in anticipation of this Alan Eatwell asked whether a home could be found at Pulborough for the locomotive should he successfully bid for it. The SDLRS were pleased to say yes, Alan joined as a member and having become the successful bidder the locomotive was delivered to Pulborough on 20th March 2019, where it will known as Agapanthus – an African Lily as colleagues at the garden centre will confirm.
The locomotive is based on the three Hunslet 0-4-0 Saddle Tanks (Linda, Blanche & Charles) supplied new to the 1ʹ10¾ʺ gauge Penrhyn Quarry Railway between 1883 & 1893. After the closure of that system in 1962 Linda & Blanche were acquired by the Ffestiniog Railway and in 1970 they were modified to a 2-4-0 wheel arrangement by the addition of a leading pony truck. It is in this form that Agapanthus was loosely modelled, though with a further trailing axle as a 2-4-2.
The story goes that three miniature engines were built by the apprentices at the Caledonian loco works in St Rollox, around the time of the late 19th century. The apprentices presumably built them so that they could get to understand how the full size ones worked and were put together. These three locos are still here today. One is in the Glasgow Transport Museum. The second is owned by Drummond Randall and for a time ran at Birchley Light Railway. It is now being overhauled. The third is allegedly the one owned by Paul Cowlin, number 769.
The history of this loco is rather vague and the 'hows' and 'whys' of the engine ending up in certain places is unknown to both Paul and his son, Tom. If anyone else has any additional information about it, it would be great to hear. However, what is known is that the loco, most likely just after the Second World War, had its cylinder and valve gear removed, and conversion had started to change it into an internal combustion engine driven loco. This work was never completed. Weirdly, all the non-painted metal parts that were removed had been chrome plated!
Later on in its life, it came into the hands of the late Matthew Kerr. Keith Stratton, owner of Ingfield Manor Railway at the time, offered to overhaul the engine for Matthew, but unfortunately, Keith passed away before finishing the overhaul and had only finished work on the tender bogies. The loco then ended up in a garage at Christ's Hospital School. This is where Paul first saw the loco. He went on to write to Matthew and came to the agreement that he would put the loco back to steam, with Matthew owning 5% of it.
For some time the engine sat at Paul's work; Horsham police workshops. He made the cylinder block and started work on the crank axle, at the farm workshops. When the new workshop at South Downs Light Railway was built, the loco and bits he had made moved there, where work has stopped on it since. This is due to other projects such as the Scotsman, 5MT, and the Mardyke Brake coach.
Paul still owns 95% of the engine and Matthew's son, John, is now the owner of the 5%. It has become tradition that John asks how the loco is doing on every Heywood trip that Paul and Tom go on. The loco now rests in the engine shed at Pulborough. Even though no work has been done on it for a few years now, Paul plans to one day finish it off and bring it back to steam. Who knows, one day this may become one of Tom's projects and he will help bring it back to steam!
In this corner of the engine shed we are building a freelance 10 1/4" narrow gauge tank locomotive to the "Priest" design by our member, Giles Favell. It has a 2-4-2 wheel arrangement.
Much of the early work was done by another of our members, Barry Metcalf, in his workshop but when he had to give this up he transferred the project to the Society. Since then progress has been slow but steady and various members have contributed by making and fitting parts. We have also had professional help from two engineering firms in Devon. Currently a boiler is being made by Bell Boilers of Gloucester.
The valve gear has been made and the necessary pins and bushes are being made by a member in his home workshop. Designs for the cylinders are being prepared and it's intended to make a wooden mock-up of the superstructure over the next few months.
When completed we anticipate the loco will weigh about 1.50 tonnes and be capable of hauling our heaviest trains.
We have no firm ideas about the livery or name that the loco will carry. Visitors are invited to make suggestions about these. We will carefully consider all proposals in due course. Please write your suggestions on a suggestion form with your name, telephone number and email address and drop it into the box below. If you'd also like to help with a small donation that would be very much appreciated.
The picture gives an idea of what the loco might look like.
By phone: 07518 753784
By email: email@example.com
Find us on Facebook
© South Downs Light Railway, 2018.
South Downs Light Railway Society Ltd
Stopham Road Station
Pulborough Garden Centre
West Sussex. RH20 1DS
A company limited by guarantee number 6426315